RX-20™ HE hard floor heads get tile and grout really clean

The RX-20 hard floor head opens new possibilities for your cleaning operation. You can clean a homeowner’s tile floor or concrete with 1,000 psi and get the agitation of a brush all in one head. Now you can spray, brush and extract…all in one machine.

Light Duty Hard Floor Brush
Suitable for Light Duty (LD) to medium duty cleaning of stone, slate, terrazzo, tile or sealed concrete floors. The brush area is tufted with blue .022 nylon fiber impregnated with 120-grit silicon carbide. 15" Diameter block, Five (5) vacuum pick-up tubes and Three (3) #2 S/S high-pressure solution jets. The brush on this attachment replaces red pads and blue pads.

Medium Duty Hard Floor Brush
Suitable for Medium Duty (MD) cleaning of stone, slate, terrazzo, tile or concrete floors. This attachment is also ideal for one-step stripping of resilient floors. The brush area is tufted with green .050 nylon fiber impregnated with 80-grit silicon carbide. 15" Diameter block, Five (5) vacuum pick-up tubes and Three (3) #2 S/S high- pressure solution jets. The brush on this attachment replaces brown and black pads and will outlast them more than 100 to 1.

Heavy Duty Hard Floor Brush
Designed for Heavy Duty (HD) and aggressive scrubbing of concrete and aggressive stripping of resilient floors. The brush area is tufted with blue .060 nylon fiber impregnated with 46-grit silicon carbide. 15" Diameter block, Five (5) vacuum pick-up tubes and Three (3) #2 S/S high- pressure solution jets. The brush on this attachment replaces high productivity pads.

Also Available:
RX Pad and Bonnet Driver

This attachment allows the RX to quickly convert to drive either carpet cleaning bonnets or standard hard floor pads. The 15" drive block allows the use of a 17" carpet bonnet. Bonnet use is increasing in popularity due to its effectiveness in shortening drying-time after extraction and the finishing of extracted olefin carpets.